Xiaomi Redmi Note 10S vs Samsung Galaxy M33 5G
60
out of 100
VS
63
out of 100
Here we compared two smartphones: the 6.43-inch Xiaomi Redmi Note 10S (with MediaTek Helio G95) that was released on March 4, 2021, against the Samsung Galaxy M33 5G, which is powered by Exynos 1280 and came out 12 months after. On this page, you will find tests, full specs, strengths, and weaknesses of each of the devices.
Key differences
Reasons to consider the Xiaomi Redmi Note 10S
- Water-resistant body (IP53 classification)
- Delivers 31% higher peak brightness (700 against 534 nits)
- Slow-motion recording at 960FPS
- Stereo speakers
- AMOLED display (versus competitor''s TFT LCD)
- Weighs 19.2 grams less
- Has a built-in infrared port
Reasons to consider the Samsung Galaxy M33 5G
- Higher display refresh rate – 120 Hz
- Newer Bluetooth version (v5.1)
- More energy-efficient CPU – Exynos 1280
- The phone is 1-year newer
- Supports Dolby Atmos sound technology
- 39% faster in single-core GeekBench 6 test: 876 and 629 points
Review
Display
Screen quality, color accuracy, brightness
Camera
Photo and video recording quality
Performance
CPU and memory performance (apps, system)
Gaming
Capabilities for playing modern games
Battery
Battery life, charging type and speed
Connectivity
Networks, ports, data transmission
Scores with a red asterisk (
*
) are approximate and may change in the future as we gather more data.
Value for money
Tests and specifications
Comparison table of technical specifications and testsDisplay
| Type | AMOLED | TFT LCD |
| Size | 6.43 inches | 6.6 inches |
| Resolution | 1080 x 2400 pixels | 1080 x 2408 pixels |
| Aspect ratio | 20:9 | 20:9 |
| PPI | 409 ppi | 400 ppi |
| Refresh rate | 60 Hz | 120 Hz |
| Adaptive refresh rate | No | No |
| Max rated brightness | 450 nits | 430 nits |
| Max rated brightness in HDR | 1100 nits | - |
| HDR support | Yes, HDR10 | No |
| Screen protection | Corning Gorilla Glass 3 | Corning Gorilla Glass 5 |
| Screen-to-body ratio | 83.5% | 82.5% |
| Display features |
- DCI-P3
- Always-On Display - DC Dimming |
- |
| RGB color space | 91.6% | 99.8% |
| PWM | 250 Hz | Not detected |
| Response time | 4.4 ms | 23 ms |
| Contrast | ∞ Infinity | 1090:1 |
Peak brightness test (auto)
Design and build
| Height | 160.5 mm (6.32 inches) | 165.4 mm (6.51 inches) |
| Width | 74.5 mm (2.93 inches) | 76.9 mm (3.03 inches) |
| Thickness | 8.3 mm (0.33 inches) | 9.4 mm (0.37 inches) |
| Weight | 178.8 g (6.31 oz) | 198 g (6.98 oz) |
| Waterproof | IP53 | No |
| Rear material | Plastic | Plastic |
| Frame material | Plastic | Plastic |
| Colors | White, Gray, Blue | Blue, Green |
| Fingerprint scanner | Yes, in-button | Yes, in-button |
Screen-to-body ratio
Performance
| Chipset | MediaTek Helio G95 | Samsung Exynos 1280 |
| Max clock | 2050 MHz | 2400 MHz |
| CPU cores | 8 (2 + 6) | 8 (2 + 6) |
| Architecture |
- 6 cores at 2 GHz: Cortex-A55
- 2 cores at 2.05 GHz: Cortex-A76 |
- 6 cores at 2 GHz: Cortex-A55
- 2 cores at 2.4 GHz: Cortex-A78 |
| Lithography process | 12 nanometers | 5 nanometers |
| Graphics | Mali-G76 MP4 | Mali-G68 MP4 |
| GPU shading units | 144 | - |
| GPU clock | 900 MHz | 1000 MHz |
| FLOPS | ~259.2 GFLOPS | ~487 GFLOPS |
Benchmarks
Geekbench 6 (Single-Core)
Geekbench 6 (Multi-Core)
AnTuTu Benchmark 10
| CPU | 116163 | 127942 |
| GPU | 104666 | 104713 |
| Memory | 88603 | 82375 |
| UX | 101936 | 107197 |
| Total score | 412654 | 423045 |
3DMark Wild Life Performance
| Max surface temperature | 41.2 °C | 44.8 °C |
| Stability | - | 91% |
| Graphics test | - | 13 FPS |
| Graphics score | - | 2233 |
PCMark 3.0
| Web score | - | 8826 |
| Video editing | - | 7323 |
| Photo editing | - | 20836 |
| Data manipulation | - | 8730 |
| Writing score | - | 14177 |
Memory
| RAM size | 6, 8 GB | 6, 8 GB |
| Memory type | LPDDR4X | LPDDR4X |
| Memory clock | 2133 MHz | - |
| Channels | 2 | 2 |
| Storage size | 64, 128 GB | 128 GB |
| Storage type | UFS 2.2 | UFS 2.2 |
| Memory card | MicroSD | MicroSD |
| Memory card max size | Up to 512 GB | Up to 1024 GB |
Software
| Operating system | Android 11 (Can be upgraded to Android 13) | Android 12 (Can be upgraded to Android 13) |
| ROM | MIUI 14 | One UI 5.0 |
| OS size | 18 GB | 26.4 GB |
Battery
| Capacity | 5000 mAh | 5000 mAh |
| Max charge power | 33 W | 25 W |
| Battery type | Li-Po | Li-Ion |
| Replaceable | No | No |
| Wireless charging | No | No |
| Reverse charging | Yes | Yes |
| Fast charging | Yes (50% in 35 min) | Yes (45% in 30 min) |
| Full charging time | 1:09 hr | 1:28 hr |
Camera
| Matrix | 64 megapixels | 50 megapixels |
| Image resolution | 9216 x 6912 | 8700 x 5800 |
| Zoom | Digital | Digital |
| Flash | LED | LED |
| Stabilization | Digital | Digital |
| 8K video recording | No | No |
| 4K video recording | Up to 30FPS | Up to 30FPS |
| 1080p video recording | Up to 60FPS | Up to 60FPS |
| Slow motion | 960 FPS (720p) | 240 FPS (720p) |
| Angle of widest lens | 118° | 123° |
| Lenses | 4 (64 MP + 8 MP + 2 MP + 2 MP) | 4 (50 MP + 5 MP + 2 MP + 2 MP) |
| Wide (main) lens |
- 64 MP
- Aperture: f/1.8 - Focal length: 26 mm - Pixel size: 0.8 micron - Sensor: 1/1.97", OmniVision OV64B (PureCel) - Phase autofocus |
- 50 MP
- Aperture: f/1.8 - Focal length: 26 mm - Phase autofocus |
| Ultra-wide lens |
- 8 MP
- Aperture: f/2.2 - Focal length: 13 mm - Pixel size: 1.14 micron - Sensor: 1/4", Sony IMX355 (Exmor-RS CMOS) |
- 5 MP
- Aperture: f/2.2 - Pixel size: 1.12 micron - Sensor: 1/4" (CMOS) |
| Macro lens |
- 2 MP
- Aperture: f/2.4 - Sensor: 1/5", GalaxyCore GC02M1 (CMOS) |
- 2 MP
- Aperture: f/2.4 |
| Depth lens |
- 2 MP
- Aperture: f/2.4 - Pixel size: 1.75 micron |
- 2 MP
- Aperture: f/2.4 |
| Camera features |
- Bokeh mode
- Pro mode - RAW support |
- Bokeh mode |
| Samples | Photo samples of Xiaomi Redmi Note 10S from DxOMark | - |
| Megapixels | 13 megapixels | 8 megapixels |
| Image resolution | 4290 x 2800 | 3264 x 2448 |
| Aperture | f/2.5 | f/2.2 |
| Pixel size | 1.12 microns | - |
| Sensor type | PureCel | CMOS |
| Sensor size | 1/3.06" | - |
| Video resolution | 1080p (Full HD) at 30 FPS | 1080p (Full HD) at 30 FPS |
DxOMark camera tests
Photo quality
Video quality
Generic camera score
Connectivity
| Wi-Fi standard | Wi-Fi 5 (802.11 b/g/n/ac) | Wi-Fi 5 (802.11 a/b/g/n/ac) |
| Wi-Fi features |
- Dual Band
- Wi-Fi Direct - Wi-Fi Hotspot - Wi-Fi Display |
- Dual Band
- Wi-Fi Direct - Wi-Fi Hotspot - Wi-Fi Display |
| Bluetooth version | 5 | 5.1 |
| Bluetooth features | LE, HID, A2DP | PBAP/PAB, PAN, OPP, MAP, LE, HSP, HID, HFP, DIP, AVRCP, A2DP |
| USB type | USB Type-C | USB Type-C |
| USB version | 2 | 2 |
| USB features |
- Charging
- USB-Storage mode - OTG |
- Charging
- USB-Storage mode - OTG |
| GPS | GPS, GLONASS, Beidou, Galileo, NAVIC | GPS, GLONASS, Beidou, Galileo, QZSS |
| NFC * | Yes | Yes |
| Infrared port | Yes | No |
| Number of SIM * | 2 | 2 |
| Type of SIM card | Nano | Nano |
| Multi SIM mode | Standby | Standby |
| eSIM support * | No | No |
| Hybrid slot | No | No |
| LTE Cat * | 12 | - |
| 5G support | No | Yes |
Sound
| Speakers | Stereo | Mono |
| Headphone audio jack | Yes | Yes |
| FM radio | Yes | Yes |
| Dolby Atmos | No | Yes |
Speakers test
Max loudness
Other
| Category | Mid-range | Budget |
| Announced | March 2021 | March 2022 |
| Release date | April 2021 | April 2022 |
| SAR (head) | - | 1.04 W/kg |
| SAR (body) | - | 1.38 W/kg |
| Sensors |
- Gyroscope
- Accelerometer - Ambient light sensor - Compass - Fingerprint |
- Gyroscope
- Accelerometer - Compass - Fingerprint |
| Bundled charger | - | Not included |
*
Disclaimer!
NFC, GSM network support, and some other specs can be different depending on the country.
Conclusion
If the display, gaming, battery life, and connectivity are more important to you, then choose the Samsung Galaxy M33 5G . But if the camera and design are more of a priority – go for the Xiaomi Redmi Note 10S .
